P3(DLP) Materials
P3 Technology (DLP)
Need high-quality parts without the hassle of molds? Stratasys P3 gives you smooth, functional parts that look like they were injection-molded.
Great for testing, prototyping, or even selling small batches—it’s your shortcut to production-ready results.
| Max Build Volume | 192 x 108 x 370 mm | 7.5 x 4.25 x 14.5 in |
| HDT @ 0.455 MPa | Elongation at Break | Tensile Strength | Color Option | |
|---|---|---|---|---|
| Dura56 | 52°C | 78% | 56 MPa | Black |
| Very smooth surface. Best for design prototype. | ||||
| ST45 | 63°C | 21% | ? MPa | Black, Clear |
| Good stiffness and moderate toughness | ||||
| WeatherX 100 | 73°C | 20% | 65 MPa | Black |
| Weather resistant, low moisture absorption | ||||
| 3172 | 52°C | 100% | 73 MPa | Black |
| High-toughness for rugged, impact-resistant parts | ||||
| 3843 | 63°C | 55% | 59 MPa | Cyan, Grey |
| High-toughness for rugged, impact-resistant parts | ||||
| HDT @ 0.455 MPa | Elongation at Break | Tensile Strength | Color Option | |
|---|---|---|---|---|
| P3 Silicone 25A | – | 672% | – | Grey |
| Silicone-like elastomer. Shore 25A | ||||
| P3 Stretch IND475 | – | 122% | – | Black |
| Elastomer with high rebound. Shore 75A | ||||
| IND402 | – | 230% | – | Black |
| Stiff rubber-like elastomer, Shore 75 – 85A | ||||
| IND3380 ESD | 200°C | 2% | 50 MPa | Black |
| Heat resistant, ESD safe for electric housings | ||||
| MED413 | 70°C | 50% | 27 MPa | White |
| Biocompatible resin certified to ISO 10993-5, -10, and -22 | ||||
Industrial-grade, high-performance 3D printing resins for end-use parts
Origin® users have access to a wide range of high-performance materials, categorized as Preferred, Validated, and Open. Preferred Materials undergo advanced testing to ensure higher accuracy, reliable first-print success, and application-specific profiles with relevant certifications. These materials are sold directly by Stratasys. Validated and Open materials, while still compatible, may not go through the same level of testing and are not necessarily offered by Stratasys.
To order PolyJet material for your 3D printing system, please see our eCommerce page.
Durable, Impact Resistant Materials
Stratasys Dura56
Best for testing part geometry and fit
HDT: 51 °C     Color: Black
Impact Strength: 56 J/m
Ultimate Tensile Strength: 44 MPa
Elongation at Break: 78%
LOCTITE 3D IND 405
Clear, moderately flexible
HDT: 53 °C     Color: Clear
Impact Strength: 72 J/m
Ultimate Tensile Strength: 52 MPa
Elongation at Break: 127%
LOCTITE 3D 3172
Great impact strength, moderately flexible
HDT: 52 °C     Color: Cyan, Gray
Impact Strength: 73 J/m
Ultimate Tensile Strength: 39 MPa
Elongation at Break: 105%
LOCTITE 3D 3843
High impact resistance
HDT: 60°C     Color: Black
Impact Strength: 59 J/m
Ultimate Tensile Strength: 53 MPa
Elongation at Break: 43%
Ultracur3D St45
<span data-metadata="">Accurate, reliable.
HDT: 63 °C     Color: Black, Clear
Impact Strength: 30 J/m
Ultimate Tensile Strength: 53 MPa
Elongation at Break: 21%
Somos WeatherX 100
Weather resistant, low moisture permeation
HDT: 67 °C     Color: Black
Impact Strength: 27 J/m
Ultimate Tensile Strength: 60 MPa
Elongation at Break: 26%
Heat-Resistant Materials
LOCTITE 3D 3955 FST
HDT: >300 °C     Color: Black
Ultimate Tensile Strength:Â 67 MPa
Elongation at Break:Â 2%
Consider Replacing: Ultem, Phenolic, PBT, Aluminum
Somos PerFORM HW
HDT: 160 °C     Color: White
Ultimate Tensile Strength: 87 MPa
Elongation at Break: 14%
Consider Replacing: Nylon 6
P3 Deflect 120
HDT: 120 °C     Color: Black
Ultimate Tensile Strength: 89 MPa
Elongation at Break: 6%
Consider Replacing: Nylon 6, PBT
LOCTITE 3D IND 403
HDT: 80 °C     Color: Black
Ultimate Tensile Strength: 72 MPa
Elongation at Break: 10%
Consider Replacing: Nylon 6/6
Elastomer Materials
Loctite IND 402
Shore Hardness: 85A
Tear Strength: 28 kN/m
Elongation at Break: 230%
Color: Black
P3 Stretch IND475
Shore Hardness: 48A
Tear Strength: 7.5 kN/m
Elongation at Break: 122%
Color: Black
P3 Stretch 80
Shore Hardness: 80-85A
Tear Strength: 19 kN/m
Elongation at Break: 117%
Color: Black